Z109PT2, PT100 Temperature Transmitter

Description:

The Seneca Z109PT2 is a compact single input, single output temperature transmitter specifically for PT100 sensors, either 2, 3 or 4 wire connected. It is designed to be easily configured without using a PC by the onboard DIP switches.
The Z109PT2 features full three-point galvanic isolation between input, output and power supply which offers protection to both the unit and other connected equipment to a maximum of 1500V. It also prevents earth loop and potential difference problems when connecting between different areas of site.
The Z109PT2 is DIN Rail mountable and offers easy connection using a detachable screw clamp "plug in" terminal system.

Specification:

Order code :		Z109PT2
Description:		RTD to DC current / voltage isolator converter
Power supply:		9..40 Vdc, 19-28 Vac 50-60 Hz
Isolation:		1.500 @ 3 way
Input:		RTD (Ni100, Pt100, Pt500, Pt1000, Ni100)
Output:		Voltage (0..5 / 0..10 / 1..5 / 2..10 V), current (0..20 / 4..20 mA)
Accuracy:		0,1%
Sample frequency / Resolution:		From 240 sps (@ 11 bit + sign) to 15 sps (@ 15 bit + sign)
Settings:		Via DIP switch (input / output type, start - end, measure range), or jumper (active / passive output)

User configuration will require the S117P1 device (which can be purchased here) and the free EASY-SETUP software (which can be downloaded below).

Please refer to the following documentation for additional information: