The Seneca Z109REG is a Universal Isolating Converter and Transmitter which is designed to accept a single channel input in either Voltage, Current or from a Thermocouple or Potentiometer; the selected input is then isolated and converted to a standard Current or Voltage output.
The DIN Rail mountable Z109REG is fully configurable using DIP Switches, alternatively the device can be configured using the free Seneca Z-SETUP-REG software (see below for more information) and a PC connected to the device using the neat PM001600 Serial cable (tick box above to purchase).

Specification:

Selectable Single Channel Input

Bipolar Current up to 20mA

Bipolar Voltage up to 10Vdc

3 wire thermoresistance RTD-PT100 probe

2 wire Potentiometer

Thermocouples types: J, K, E, N, S, R, B, T

Selectable Single Channel Output:

Voltage 0 to 5V or 1 to 5V
Current 0 to 20mA or 4 to 20mA

Easy configuration using DIP Switches or the Z-Setup software
3 port galvanic isolation separates Input, Output and Power Supply
Time saving detachable “plug in” screw terminals
Compact DIN Rail mountable enclosure, just 17.5 x 100 x 112mm
Power supply: 19 to 40 Vdc, 19 to 28 Vac

About PC programmability:

Z-SETUP is an easy to use software designed exclusively for Z109REG module, it allows further configuration of the Z109REG increasing the possible applications for the instrument, connection from the module to a PC requires the use of the Seneca PM001600 cable which converts the units front "Jack connector" to a standard RS232 output (Click here for additional information about Z-SETUP and the PM001600 cable).

Please refer to the following documentation for additional information:

SENECA WebStore | SENECA Z-Line | Z-Line Signal Isolators and Converters | Z109REG, Universal Converter