Description:

The Seneca Z170REG is designed to accept a single channel Current or Voltage signal which is then isolated and split into two independent outputs user selectable in both range and type using DIP Switches. The Z170 is DIN Rail mountable, and its detachable "plug in" screw terminal saves a great deal of wiring and time.

Specification:

Power Supply

10-40 Vdc or 19-28 Vac (50Hz-60Hz)

Input

Thermocouple (J, K, R, S, T, B, E, N)
RTD (PT100-500-1000-Ni100) with 2, 3 or 4 wire connections
Voltage (0...+10V)
Current (0/4...20mA)
Potentiometer (1KΩ - 100KΩ)

Output

N.2 configurable channels (0..10V, 0/4...20mA)

Galvanic Isolation

1.5 Kvac (4-way)

A/D Resolution

14 bits

Response Time

11ms

Configuration

Dip-switches, PC software, S117P

User configuration will require the S117P1 device (which can be purchased here) and the free EASY-SETUP software (which can be downloaded below).

Please refer to the following documentation for additional information:

SENECA WebStore | SENECA Z-Line | Z-Line Signal Processors | Z170REG, DC Duplicator/Isolator

Z170REG, DC Duplicator/Isolator

Z170REG, DC Duplicator/Isolator with Universal Input & 2 Outputs

Price: (4 or fewer items) £136.50 (Excluding VAT at 20%) Price: (5 to 9 items) £132.50 (Excluding VAT at 20%) Price: (10 to 24 items) £128.50 (Excluding VAT at 20%) Price: (25 or more items) £124.50 (Excluding VAT at 20%)

Price: (4 or fewer items) £136.50 (Excluding VAT at 20%)
Price: (5 to 9 items) £132.50 (Excluding VAT at 20%)
Price: (10 to 24 items) £128.50 (Excluding VAT at 20%)
Price: (25 or more items) £124.50 (Excluding VAT at 20%)