SENECA WebStore

ZC-24DI, 24-Channel Digital Input CANopen/ModBUS Module

SENECA WebStore | SENECA Z-PC Line  | Z-PC Line, CANopen/Modbus Modules | CANopen Digital Modules |  ZC-24DI, 24-Channel Digital Input CANopen/ModBUS Module

ZC-24DI, 24-CH Digital Input CANopen/ModBUS Module

ZC-24DI, 24-CH Digital Input CANopen/ModBUS Module


Price: (4 or fewer items) £177.50 (Excluding VAT at 20%)
Price: (5 to 9 items) £172.00 (Excluding VAT at 20%)
Price: (10 to 24 items) £167.00 (Excluding VAT at 20%)
Price: (25 or more items) £162.00 (Excluding VAT at 20%)

Quantity:


Description:

The ZC-24DI module acquires 24 single-ended digital signals, it converts them to a digital format (IN 1-24 state) and it counts the input-pulse number (pulse counter for IN 1-8).

General Characteristics :

  • Acquisition of digital signals from sensor: reed, NPN, PNP, proximity, contact, etc...
  • Configuration of a filter applied to input signals IN1-IN8 (noise filter) to attenuate the noise overlapped to the digital signals
  • Pulse counters for digital signals IN1-IN8, with max frequency equal to 10kHz, 32bit-registers
  • Advanced management of the pulse counters for digital signals IN1-IN8 (for each pulse counter: overflow, preset value and reset/preset command are available)
  • Power of 24 sensors using internal supply voltage (Vaux=16V) ? It is possible to configure the module (node) address and baud-rate by Dip-Switches
  • It is possible to add/remove the module to/from RS485-bus without disconnecting the communication or power supply
  • It is possible to switch automatically RS485 to RS232 or vice versa
  • CAN interface with CANOpen protocol: max 1Mbps

  • Specification:
    Order code : ZC-24DI
    Description: 24 CH digital input CANopen / ModBUS
    Power Supply: 10..40 Vdc, 19..28 Vac
    Max consumption: 2,5 W
    Isolation: 1,5 kVac (3 way)
    Response time: 2,5 ms
    Operating Temperature: -10..+65°C
    Dimensions: 35 x 100 x 112 mm
    Polarity: EN 61131-2 sink (npn)
    Channels: 24
    Counters: 8 @ 32 bit (max 10 kHz)
    Pulse width: Min 50 µs
    TPDO: < 1 ms


    User configuration will require the S117P1 device (which can be purchased here) and the free EASY-SETUP software (which can be downloaded below).

    Please refer to the following documentation for additional information:

    ZC-24DI Datasheet
    Click here to download the ZC-24DI Datasheet in PDF format  

    ZC-24DI User Manual
    Click here to download the ZC-24DI User Manual in PDF format  

    ZC-24DI Installation Manual
    Click here to download the ZC-24DI Installation Manual in PDF format  

    ZC-24DI EDS File
    Click here to download the ZC-24DI EDS File  

    EASY-ZC-24DI Configuration Software v1.05
    Click here to download the EASY-ZC-24DI Configuration Software v1.05  

    ZC-24DI Declaration of Conformity
    Click here to download the ZC-24DI Declaration of Conformity  

    SENECA WebStore | SENECA Z-PC Line  | Z-PC Line, CANopen/Modbus Modules | CANopen Digital Modules |  ZC-24DI, 24-Channel Digital Input CANopen/ModBUS Module