Z-D-OUT, 5-ch Digital Output Relay ModBus

Description:

The Seneca Z-D-OUT is a ModBUS device with 5 configurable digital relay output channels. Each relays can be configured for NO (Normally Open) or NC (Normally Closed) in the "rest" state. The Z-D-OUT is designed to be integrated to a ModBus RTU Network
The Z-D-OUT is easily configured using Z-PROG.

Specification:

• Input galvanised separation / the remaining circuits are at low voltage : 2500 Vac
• Interface :
• 2 Wire Serial RS485
• Selectable speed: 4800, 9600, 19200, 38400, 57600 baud
• Configuration of relays as NO or NC (rest status)
• Communication protocol : MODBUS RTU
• Maximum 32 nodes.
• Communication time : Below 10 ms (at 38400 baud)
• Connection distance : up to 1200 m
• Outputs : 5 relay type SPST NO with common
• Current capacity :
• Resistive load 5A 250Vac
• Inductive load 2A
• Maximum total current : 12 A on common clamp
• Communication times below 10 ms (at 38400 baud)
• Connection distance up to 1200 m
• Detachable "plug in" screw terminals
• Power supply :
• 19 to 40 Vcc or
• 19 to 28 Vac
• 50/60 Hz
• Max Power Consumption: 2,5W

User configuration will require the S117P1 device (which can be purchased here) and the free EASY-SETUP software (which can be downloaded below).

Please refer to the following documentation for additional information: