Z109REG-ER, Universal Converter with Square Root Extraction

Please note this product has been superseded by the Z109REG2ER

Description:

The Seneca Z109REG-ER is a Universal Isolating Converter and Transmitter with Square Root Extraction, the Z109REG-ER is designed to receive a single channel input signal either in Voltage, Current or from Thermocouple or a Potentiometer, the input is then isolated and converted to an optionally linearized output signal in a standard Current or Voltage signal, the units also has Square Root Extraction capabilities ideal for "flow" type applications.

The Z109REG-ER is fully configurable using DIP Switches, alternatively configuration and use of the device can be done using the free Seneca Z-SETUP-REG software (see below for more information) and a PC connected to the device using the neat PM001600 cable (tick box above to purchase).
DIN Rail mountable the Z109REG-ER as a detachable "plug in" terminal block reducing wiring errors and field wiring time..

Specification:

• Selectable Single Channel Input: 
• Bipolar Current up to 20mA
• Bipolar Voltage up to 10Vdc
• 3 wire thermoresistance RTD-PT100 probe
• 2 wire Potentiometer
• Thermocouples types: J, K, E, N, S, R, B, T
• Selectable Single Channel Output: 
• Voltage 0 to 5V or 1 to 5V 
• Current 0 to 20mA or 4 to 20mA
• Optional Square Root Extraction
• Easy configuration using DIP Switches or the Z-Setup software
• Data logging features when used with Z-Setup
• 3 port galvanic isolation separates Input, Output and power supply
• Time saving detachable "plug in" screw terminals
• Compact DIN Rail mountable enclosure, just 17.5 x 100 x 112mm
• Power supply: 19 to 40 Vdc, 19 to 28 Vac

About PC programmability:

Z-SETUP is an easy to use software designed exclusively for Z-Line modules, it allows further configuration of the Z109REG-ER increasing the possible applications for the instrument, connection from the module to a PC requires the use of the Seneca PM001600 cable which converts the units front "Jack connector" to a standard RS232 output (Click here for more information about Z-Setup and the PM001600 cable).
The software requires the use of a Windows operating system and is available in English as a free download.

Please refer to the following documentation for additional information: